AJB Vinyl Design Logo

Small Decal Installation Instructions

1. Clean surface using water or a mild cleaner such as windex.
2. Without removing paper backing, position decal on surface exactly where you want it, measure if needed. Mark where you want the decal to go
3. Remove backing from decal (the decal should stick to the transfer tape)
4. Firmly rub across entire decal and smooth out any bubbles, working from the center outward.
5. Gently pull back transfer tape starting in the right upper corner and pulling at a diagonal.
6. You are finished!
Note: If applying vinyl while outdoors, outside temperature should be above 65 degrees and no more than 90 degrees (If the surface is hot, cool it down if possible). This will prevent bubbling, streching, cracking, and adhering difficulties.